AL-40S Long Range Low Power Elert Easy to Instal Infrared PIR Motion Detector
1. SPECIFICATIONS
| MODEL | AL-40S |
| Detection Range | 40ft x 56ft (12mx17m) |
| Input Voltage | 10 ～ 16VDC |
| Current Drain | 25mA(max.) at 12VDC |
| Pyro Type | Dual Element |
| Pulse Count | Qualified Motion Analysis - 2 or 4,Selectable |
| Warm- up Period | Approx. 45 sec |
| Alarm Period | Approx. 2.5 sec |
| LED Indicator | Red Alarm LED(Selectable On / Off) |
| Alarm Output | N.C., 24V DC 0.5A max. |
| Tamper Output | N.C.,Open when cover is removed. 30V DC,0.5A max. |
| Mounting Height | 6.5 ～ 8.5 ft (2～2.6m) |
| Operating Temp. | 14°F ～ 131°F (- 10℃～55℃) |
| Environmental | 95% max. |
| Weight | 3.0 oz (83.5g) |
| Dimensions | 3.9"Hx2.5"Wx1.7"D (98.0x64.0x43.0mm) |
The product is a wall-mounted passive infrared detector with high stability. It adopts advanced signal processing technology, providing superhigh detection and anti-false alarm abilities. When an intruder passes through the detection area, the detector will detect the movements of human body automatically. If any movements, it will send alarm signal to the connected alarm host. It is suitable for safety protection in residential houses, villas, factories, shopping malls, warehouses and office buildings etc.
The feature for AL-40S is as below:
1, Unique Fresnel lens, effectively increase the sensitivity
2, pet immunity
3, key components are imported from Japan, such as Japan made relay which can do ON/OFF for 1billion times
4, a under window which can reduce the blind detect area
5, with bracket
2. DIMENSIONS
3. DESCRIPTION AND OPERATION
4. DETECTION PATTERN
8. TROUBLE SHOOTING AND MAINTENANCE
| TROUBLE | TROUBLE CAUSE | REMEDY |
| Unit does not power up. | No or low input power. | Apply proper input voltage. |
| Input power polarity reversed. | Correct wiring polarity. |
| Alarm LED does not light. | LED jumper is set to “LED OFF”. | Set LED jumper to “LED ENABLE”(See Section 3). |
| Incorrect sensor mounting height. | Increase /decrease mounting height. |
| Pulse Count setting incorrect for secured area. | Set pulse count jumper to suit the required detection characteristics. |
| Alarm LED/Relay triggers with out movement in detection area. | Unsecured environment:Animals / rodents in detection area . | Block access of animals / rodents. |
| Heater/air conditioning equipment in sensor view. | Re-aim sensor. |
| Direct sun or headlights in sensor view. | Add curtain/shade to block light sources. |
| LED indicates alarm, no alarm output. | Incorrect wiring at alarm output terminals. | Correct wiring fault. |
| Lightning damage. | Replace sensor. |
| Alarm LED on constantly, no fault in protected area or wiring. | Defective unit. | Replace sensor. |
| Unit continues to operate after the input power has been disc- onnected. | The wire to the “ - ” power input was disconnected, the“ + ” is still connected. The power can now find a return path through the Alarm Output protection device and alarm wiring. | Disconnect wire from the “ + “ power input. |
MAINTENANCE
INSPECTION:An inspection of this unit should be made periodically,consisting of,but not limited to all mounting,wiring,and the condition of the interior area and components.
CLEANING: Clean the plastic parts of this unit with a soft , clean , cloth dampened with water.
TESTING: This unit should be tested routinely for proper operation. At a minimum,operation should be fully checked yearly.
NOTES: This detector is designed to be incorporated into an alarm system. As it is part of a system, ALEPH cann’t assume responsibility for theft or damage if the system fails to operate.
About US
International leading alarm security system, door magnetic contacts, smart home security products, smart sanitary products
- The security products of AIN which are ALEPH brand receive the honor of a&s Top 10 International brands for many years
- We are the sole supplier of Vanke Group for photo beam sensors and our alarm security products have been widely used in the various real estate projects and property areas
- We take 80% of orders of the large Japanese police companies
- Supply flow sensors to TOTO (smart toilet), NORITZ(gas water heater) and other customers
- Research and develop the Smart Home Security System AHS-4000 Series with Thailand Police Department
- Cooperating with the Tokyo City Government to develop Luna Nurse sensors
- Cooperating with Kyushu Institute of Technology to develop automatic driving technology
Product Tags:
|
|
Low Power Alert Passive Infrared Detector Dual Element Easy To Instal Images
|
